Newton’s Third Law?

Newton’s third law in summary is for every action, there is an opposite and equal reaction.  I’m not sure if it’s me or inherent of boats but it seems for everything positive  I do to the boat, there is something equally negative that happens.

Let’s start off with oil and filters change.  Not your typical oil change like on your car.  I don’t just jack up the boat, slide underneath and drain the oil.  The engine in located in a small compartment hidden under the steps.  Where the green arrow is pointing in this photo.



The oil change went fine.  The oil filter replacement went fine. While I was at it and folded up like a contortionist I decided to change the fuel filter also.  Might as well I thought. Clean oil, new oil filter, I should change the fuel filter because I have no idea if it has ever been changed.  Simple enough. The fuel filter replacement went fine as well, or so I thought.


(didn’t have a photo but this is one of the fuel filters)

Started the engine back up to check for leaks, and the engine wouldn’t run. It was like it was trying but on one cylinder. It shook the boat and sounded very violent in comparison to the normal sewing machine sound.  After  bleeding the fuel and trying and re-trying still no luck.  I went from a running engine that had old oil, dirty oil and fuel filters, to an engine with clean filters and oil but won’t run.

Did I unplug something by accident?  Double checks everything, No.

Did I bleed the air out of the fuel filter bowl?  Yes. I tried bleeding it again, still not running right. UGH!  Now the bleed screw gaskets are leaking. UGH!

I sat down in the cockpit for a bit not knowing what I did or how to fix it. It was working, I thought I made it better, but made it worse.  I talked to a neighbor whom suggested bleeding it at the fuel injector furthest away.  Never done that before, nor have I heard of it. Sounded scary, but it was actually easy.  I did that, and she was back to working like normal. There was our sewing machine sounding engine.  More boat maintenance to come.

Posted in learning, maintenance, Repair | Tagged , , , , , | 1 Comment


I cannot believe it is already December, nor can I believe it has been so long since an update. The last few months have been so busy in all directions. After a little bit of fun we have had several things going on (several photos to scroll through).

Alicia had her mom come down and they took Oscar back to Tennessee.


Alicia flew back down with her dad and we got to entertain him for a few days.  We took him down to Key West, and a few other places.  He flew back and my parents came down for a few days.

Many years ago, we took a family vacation and got about nine miles from Key West and the road was shut down and we never made it to Key West.  This time we took my parents down and they finally made it.  We also wanted to explore a little more in Key West than normal and we finally found the end of the road. Processed with Snapseed.

We took them to Robbie’s to see and feed the tarpon.  This was awesome for my parents to see some fish that were as long as they are tall.  Nothing like the lake fish back home.

After all family was back home and about a year later, we have to plan for hurricanes. However this year, we are not in a house but floating on the water. Last year was not really eventful thankfully, but this year we had one pointing right at us.


A possible Cat 4 with 130mph winds, while on a sailboat….. umm that’s a little concerning.  What were we to do? Plan and hope for the best I guess.  We spoke with others in the marina that have been through this sort of thing.  Basically you tie up your boat that allows for tidal movement (up and down), storm surge (extreme up and down), and winds changing directions as the storm nears, and goes by.


We double checked the cleats on the dock because some where broken and would of left our boat helplessly swinging around (cleats are where the boat is tied to the dock like in this photo).


We put out 15 lines to spiderweb out boat in the marina, removed our canvas bimini, and lashed down our mainsail.  Anything to minimize things getting caught by the wind and ripped to shreds (similar to these photos below, not of our boat).


It looked crazy and was a lot of work, but just as you would protect your house the best you can, we did for our ‘house’.  Again thankfully we were spared and the weather was no more that a typical summer storm with little wind.  Other parts of the coast were not as lucky.

We also got a vacation in.  We took a cruise to the western caribbean, to places we enjoy and have been to before. As usual we try to find the road less traveled, more quiet and with abandoned beaches. fullsizerender-6

Also visited some regular tourist areas.

We went to an ice room (yes sadly in flip fops, bad decision), first time bowling at sea, and lots of R&R.

After all of this I still managed to get in some boat maintenance.  Changing the raw water pump impeller and replacing poor neglected raw water hoses.

Ray our neighbor was able to restitch our genoa (The genoa is a type of large jib or staysail that overlaps the main sail). There is always something to do or repair on the boat.



We have several other repair items going on but these will be posted after completion. Until next time.

Posted in Repair | Tagged , , , , , , , , , , ,

Little bit of fun

It’s not always work, sometimes there is a little bit of fun also. At some point the scales will tip to more fun than work but that will come in time.

Some most recent fun was a close encounter with a caribbean reef shark. While most people would be scared of sharks because of the older movies and news reports putting fear into the public about sharks, as a diver they are no real threat.  It is actually quite cool to see a shark in its natural habitat. Seeing one up close makes for a very surreal experience. Here is a recent photo I took of a very close encounter.



We took an airboat tour through the everglades looking for gators and doing some 360* spins to cool off in the heat.

FullSizeRender 6

The babies are always cute, until you take the tape off their mouths…

Alligators were fun to see and we got to learn a little about them also. Some are curious than others.


A ball python will not be in our near future as a boat add on.

FullSizeRender 7

While very beautiful, birds will not be on the boat either. They make too much of a mess.


More fun was with a red fox. Now not your typical color this white and black, red fox was very adorable.


We got to spend some time with an anteater.

FullSizeRender 4

We swam with dolphins and participated in some skills with them. (note: these dolphins were rescues, not taken illegal or purchased as some facilities may do, and the facility took very good care of them. rehabilitating them, nurturing them, whatever it took to make sure they were healthy)

FullSizeRender 2

The highlight had to be seeing a sloth in person.  They are so mesmerizing and adorable. Prepare yourself for some uncontrollable cuteness in the next photos:

FullSizeRender 5FullSizeRender 3IMG_7783

Thank you to Everglades Alligator FarmSafari Edventures, and Dolphins Plus for our recent days of fun.  (no animals were harmed during these experiences)

Posted in playing | Tagged , , , , , , , ,

All In A Days Work

Despite being busy at work and all of the repairs and maintenance on At Ease, I finally got to put together a little video of a day at work. This is what makes it all worth while.

Posted in playing, Repair, work | Tagged , , , , , ,

What goes down should come up

A little different than the saying ‘what goes up must come down’ but on our sailboat I’m talking about our newest small project. 

Our windlass wasn’t working properly and it needed some attention. A windlass is a type of winch used especially on ships to hoist anchors and haul on mooring lines. 

While you don’t have to have a windlass, you can hoist anchor by hand and the strength of your back but it should be really nice to have it working and use it instead of my lower back. 

Our windlass has two buttons on deck at the bow. One to deploy anchor, or send it down, and the other to retract, or bring it up. The down works fine but the up button doesn’t work at all. I went into investigation mode and started taking the buttons apart. Inside everything appeared fine and it was getting power. Touching the contacts together proved that by a slight tingle through my body. I should have used a bolt meter but that’s over and done with. 

The next step was to figure out what else it could be. Buying a used boat with a windless already installed turned into a game of hide and seek to find where everything was ran and installed. After opening hatches and lockers, removing all contents and putting everything back, I traced the power feed up into the v-berth (our now storage locker). I had to remove everything from there and figure out how to disassemble most of the v-berth to get behind some panels where I believed the feed wires to be going. 

I found the wires right where I thought and also found a solenoid that controlled the foot switches to the windlass. It looked almost identical to this photo I found. 

There was some corrosion and after troubleshooting the solenoid, I found it to be defective. $116 later and I had a bright shiny new one installed. 

Our windlass now functions properly and will be ready to test after a few other projects once we take At Ease out for a sail. 

Posted in Uncategorized

The Heat is On!

Summer really is in full swing, which means I have been busy working and little time to keep updating this site. I will do better in the future.

This is our first summer on At Ease and since it has gotten so hot, our little sail boat a/c unit is struggling to keep up.  It is nowhere nearly as hot inside as it is outside, but it is also not your typical home a/c unit either.


This is almost the daily forecast. The low of 80* is anywhere from 11pm-6am then gets hotter from there.  While the sun is so brutal I have looked into getting sun shades,boom tents or other varying names for shade on a boat.  I took some measurements of what I thought would work and went to a local canvas shop that has already done some zipper repairs (for very little money) and hoped they would be able to make a cover for a good deal.


That was far from a good deal.  We were quoted $1100 for sunbrella material in the dimensions above.  Holy cow, were they using gold thread or something?  I had to find an alternative and after many headaches from staring at web pages I finally found a source. I found Beck’s Custom Canvas.  This was a game changer.  I originally found them on this eBay link.  When they didn’t have the size I wanted I reached out via eBay PM and then email.  Responses were quick and the quote was unbelievable.  On top of that, I ended up getting a slightly larger dimension tents to cover more area. For both a boom tent and a forward bow tent plus shipping it was only $350 (your project may vary). They saved me $750 and I got the same thing.  Wow is all I can say.



Now this has helped tremendously but not back to normal.  While a traditional home a/c unit can cool to whatever temp you set it to, our marine a/c unit is raw salt water cooled.  Meaning that it sucks up sea water from right under the boat, with the compressor and evaporator it removes heat from the air inside the boat and transfers that heat to the sea water and is then spit out overboard.


The biggest thing that is hurting it is the thermostat is set to 76* but the sea water is 88*-90*.  When the sea water is this warm, it makes it difficult to add the removed heat to the already heated sea water.

Until next time, here how one of my days at work was spent, diving with 17 dolphins!!!

video here: dolphins!





Posted in Uncategorized

What Have You Been Up To?

After conquering a little poo project, several things have taken place that have went undocumented.

Oscar our dog is getting acquainted with the boat.


He seems to favor my spot on the bed, leaving me with very little room.

FullSizeRender 2

Oscar went to the beach to hang out for the very first time.


From time to time he behaves when new people come around and other times he gets very protective and growls and barks. Most recently he decided to be protective and run to the dock, forgetting there was about 3 feet between  a small pier and the boat before he can get to the dock. That mistake resulted in Oscar falling in and him learning how to quickly recall his instincts and swim for the first time.  I think he was a little embarrassed. IMG_7479

We also had some visitors in the form of manatees and dolphins. Didn’t have time to take photos of the dolphins.


I have been busy working and trying to replenish funds that have been spent making repairs on At Ease so far.  Not having enough time after work to start a full project and complete it same day, I have mostly been making a list of would like to do, have to do, and can get to some time down the road projects. In the meantime I have been working full blast since it is now summer.  Well by work I mean hanging out with cool creatures.

eagle rayfilefishgruntsnurse sharkturtle


You can also take a peek at a day in the life of a crew member at Rainbow Reef Dive Center, kudos to Logan for putting this together.


I still have some more projects to complete and hope to take At Ease out for her first sail soon.



Posted in playing, work | Tagged , , , , , , ,